BUCKPREST - BUCKRAM STIFFENER 250 ML - REFERENCE: ENT/007 BLANC

STIFFENER FOR LIGHT, NON-THERMO-ADHESIVE MILLINERY BUCKRAM

This new product makes that the light, non-thermo-adhesive millinery Buckram (Reference: ENT/007 BLANC) turns into a strong fabric which is ideal to give the brims of your pamela hats, hat structures, bases, etc. a rigid and long-lasting finish, even more than normal Buckram.

USER INSTRUCTIONS:
The product is easy to apply.
You simply have to take a brush and spread it on both sides of the light, non-thermo-adhesive millinery Buckram;
We have to ensure that the product is evenly distributed on both sides of the fabric and let it dry. We can accelerate the process with hot air (a hair dryer is enough) and the Buckram will be prepared. Once dry, we have to apply steam to the Buckram and then we will place it between the two fabrics that we have chosen to work with for our creation of hats, caps, pamelas, etc. Then afterwards we use an iron to activate the bonding process (it is advisable to place a cotton fabric between the iron and the fabric to protect it from the heat of the iron). We will slowly move the iron across the complete surface of the object. Once well we have glued the Buckram on both fabrics, we will wet it and put it into the chosen mold. Once we have given it its form we will iron our new creation again (keeping in mind that we have to protect it with a cotton cloth or similar from direct touch with the iron) in order to give it the desired form.

We have to wait for the product to dry at room temperature and before taking it out of the mold we will give it a final touch with our iron.

The product we´re talking about is not compatible with thermo-adhesive Buckram.

250 ml bottle.